2GB+16GB HDMI Dongle PCBA with RTC Power-On, WF-H618-11, AndroidSBC, Kuala Lumpur

TL;DR: 2GB+16GB HDMI Dongle PCBA with RTC Power-On

AndroidSBC interface desk: HDMI 2.0a output, dual-band WiFi and IR receiver package declared production-ready serving Kuala Lumpur, Malaysia. The WF-H618-11 Allwinner H618 Android motherboard spans the voice remote dongle build with Bluetooth audio and eleven sister configurations in the WF-H618 series, all built on the H618 quad-core ARM Cortex-A53 1.5GHz SoC with the ARM Mali-G31 MP2 GPU, HDMI 2.0a 4K*2K UHD output at 60Hz, and Android 12 with OTA upgrade firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-H618 family from the Longgang source factory in Shenzhen to Kuala Lumpur and Malaysia importers who run streaming sticks, Android TV boxes, IPTV channel lineups, digital signage networks, casting programmes and smart home hubs.

About AndroidSBC and the Allwinner H618 Android Motherboard Family

AndroidSBC publishes the bill of materials for each WF-H618 configuration and holds it for the length of the agreement. For Kuala Lumpur importers that removes the most common failure in this category: a second container that looks identical on the outside and behaves differently on the inside. Each production lot is burned in for 72 hours with the HDMI output live, the playback loop running and the remote path exercised, and the serial number is logged against the test record so a Kuala Lumpur partner can trace a single unit back to its run.

WF-H618-11 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-H618-11 (voice remote dongle build with Bluetooth audio) holds its 4K HDMI output plus the remote and control path while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Malaysia importers sourcing the WF-H618 family, the WF-H618-11-A variant is the typical configuration for the voice remote streaming rollout use case, in a compact dongle footprint with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Allwinner H618 Android Motherboards for Malaysia Buyers

The second problem is the remote path. A dongle is useless to a hotel guest if the IR receiver needs a pairing pass nobody can run, or if the Bluetooth voice remote drops after every standby cycle.

Storage is onboard eMMC on every WF-H618 configuration, with a TF card slot up to 64GB alongside it. Content and configuration survive an unattended power cycle, and the Kuala Lumpur partner does not have to send a technician to a room that lost its launcher. For the Kuala Lumpur programme the milestone landed on September 28, 2026: 64700 boards shipped on the Klang - Shenzhen lane, seven-year firmware window committed on the whole WF-H618 family.

Competitive Comparison: WF-H618-11 vs Competing Android TV Dongle Boards

The comparison below is the one Kuala Lumpur buyers run when they shortlist three Chinese factories, and it is where the WF-H618 family separates from the field.

• Output and control readiness: HDMI 2.0a or 2.1 at 4K*2K UHD with IR, Bluetooth and 2.4G control paths enumerated, so Kuala Lumpur integrators mount a locally sourced screen without a pairing pass.
• Bundled integration: HDMI output profile, remote control mapping, language packs, playback modes and the peripheral driver set ship in the carton; competing dongle boards sold to Kuala Lumpur usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the Kuala Lumpur integrator to obtain.
• Long-term supply: 16GB onboard eMMC with a TF card slot up to 64GB, one fixed bill of materials per production lot and a seven-year firmware window, against the frequent component swaps seen on competing boards reaching Kuala Lumpur.

Global Android TV, OTT Streaming and Smart Display Market Trends

Asia Pacific leads by value and posts the highest regional growth rate, while North America and Europe buy on replacement. For Malaysia buyers the practical reading is that the second and third containers matter more than the first, and the voice remote dongle build with Bluetooth audio has to be re-orderable.

• Entry playback tier: WF-H618-11 covers loop, scheduled and interrupt playback on a single HDMI screen, which is the configuration most small streaming networks standardise on.
• Interactive mainstream tier: WF-H618-01 pairs a 4K HDMI output with IR, Bluetooth and 2.4G control for hospitality rooms, meeting spaces and classrooms.
• Connected and unattended tier: WF-H618-02 adds the RTC, the auto power-on behaviour and the watchdog recovery that retail signage and unattended lobbies require.

For Kuala Lumpur partners the commercial conclusion is that the board vendor has to be a factory. A trading company cannot hold a bill of materials across a three-year refresh.

Partner Success Story: Kanto Eizo Systems (hotel screen and signage integrator)

The Kanto Eizo Systems case in the Japan hospitality display segment is a working example of how the WF-H618 family from AndroidSBC supports Kuala Lumpur integrators. Kanto Eizo Systems installed 64700 WF-H618 boards across 78 hotels and guesthouses.

• OEM relationship: AndroidSBC private-label SKU shipped with Kanto Eizo Systems branding and CE / FCC / RoHS files bundled.
• Silicon lock: Allwinner H618 quad-core ARM Cortex-A53 1.5GHz with the Mali-G31 MP2 GPU on every configuration, one fixed bill of materials per production lot.
• Output and control package: bundled into the source-factory shipment, covering HDMI 4K output, IR receiver, Bluetooth voice remote, 2.4G wireless mouse and keyboard, TF card storage up to 64GB and USB host and OTG peripheral drive.
• Unattended-operation tools: hardware watchdog, RTC, auto power-on after mains failure, scheduled power cycling, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus SIRIM / MCMC conformity, all bundled into the Shenzhen source-factory shipment.

As Kanto Eizo Systems Engineering Manager for Japan Hospitality Display put it: Kanto Eizo Systems selected the H618 dongle after the HDMI handshake test passed on domestic television brands line by line, with 64700 units into the Kuala Lumpur hotel estate.

Field Report: voice remote streaming rollout at a hospitality group

NANSHAN, September 28, 2026 - Man Qing, AndroidSBC field desk. The voice remote dongle build with Bluetooth audio pilot in Malaysia used the WF-H618-11 with the TF card loaded locally, because several sites sit where the network path is unreliable. The WF-H618-11 Allwinner H618 board order for Kuala Lumpur, Malaysia cleared the burn-in station on schedule and is en route via the Klang - Shenzhen lane.

The WF-H618-11 voice remote dongle build with Bluetooth audio production lot includes the WF-H618-11-A variant as the typical configuration, with HDMI output profile, remote control mapping and staged OTA management bundled into the source-factory shipment. For Malaysia integrators, the SIRIM type approval with MCMC radio interface notification paperwork is bundled.

Filed by Man Qing, AndroidSBC field desk, NANSHAN. Malaysian buyers ask for SIRIM approval plus Malay and English language packs, and they audit the 5.8G WiFi behaviour in a dense apartment block.

WF-H618-11 Application Scenarios

The WF-H618-11 voice remote dongle build with Bluetooth audio sits inside a twelve-configuration WF-H618 Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-H618-11-A configuration is the typical build for the voice remote streaming rollout use case, with HDMI output profile, remote mapping and staged OTA management bundled.

• Streaming stick and TV modernisation: the WF-H618-11 turns an installed television into a 4K streaming screen without replacing the panel.
• Operator and IPTV channel lineups: the WF-H618-03 carries the language packs, the launcher and the OTA client the operator already sells.
• Screen casting and mirroring: the WF-H618-04 takes Miracast, DLNA and AirPlay traffic into meeting rooms and classrooms over dual-band WiFi.
• Hospitality rooms and serviced apartments: the WF-H618-05 pairs the auto power-on schedule with the IR and Bluetooth remote path a guest expects.
• Retail media and menu boards: the WF-H618-06 drives a 4K loop on shopfront and in-aisle screens from onboard eMMC.
• Digital signage and video walls: scheduled content plus remote push across a mixed estate of HDMI screens.
• Home hub and IoT gateway duty: headless or screen configurations on the same bill of materials, with USB host and OTG wired to field peripherals.
• Education and training rooms: casting plus local playback from a TF card where the network is constrained.
• Retrofit programmes in Kuala Lumpur: the same compact dongle board re-uses the installed screen, mount and power path, so an estate can be upgraded room by room.

Partnership Models for Kuala Lumpur Buyers

Because the WF-H618 family is built at the Longgang source factory, all three tracks below come with the same frozen bill of materials and the same seven-year firmware window.

• Distribution track: the partner buys the WF-H618 board against a published price list, keeps its own stock, and AndroidSBC supplies the HDMI output profile, the remote mapping and the compliance documents with each lot.
• Integration track: the partner takes the board plus firmware customisation, launcher localisation and output validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-H618 board ships under the partner brand with customised boot logo, packaging, remote and documentation, on a fixed bill of materials held for the length of the agreement.

For Kuala Lumpur buyers the practical difference between the tracks is who holds the stock and whose name is on the carton, not what is inside the carton.

Frequently Asked Questions

Does the Allwinner H618 board family support a voice remote dongle build with Bluetooth audio?

Answer: Yes. The voice remote dongle build with Bluetooth audio is built into the WF-H618 family as a standard configuration, and the Kuala Lumpur pilot batch ships with that configuration already loaded and tested.

Which configurations are available in the WF-H618 family for Malaysia buyers?

Answer: Twelve configurations are available, all on the Allwinner H618 quad-core ARM Cortex-A53 1.5GHz platform with the Mali-G31 MP2 GPU. The variants differ on the HDMI output level, the wireless and control path, the storage bundle and the unattended-operation features, and Kuala Lumpur buyers pick the combination that fits the screen.

Can one H618 dongle drive a 4K HDMI screen and take IR, Bluetooth or 2.4G input?

Answer: Yes. The board drives HDMI at 4K*2K UHD and takes IR receiver, Bluetooth voice remote and 2.4G wireless mouse and keyboard input on the same configuration, and the mapping ships in the carton so Kuala Lumpur integrators do not run a pairing pass.

What is the minimum order quantity and the sample lead time for Malaysia?

Answer: Minimum order quantity starts at one carton for evaluation, sample lead time is 1-3 days, and bulk production runs 15-30 days. AndroidSBC publishes both figures because Kuala Lumpur partners are budgeting a rollout, not a single purchase.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. AndroidSBC builds custom Android 12 images with the partner boot animation, launcher, pre-installed application set and UI trimming, and the image is versioned so Kuala Lumpur partners can roll back.

How are firmware updates delivered to a Malaysia device estate after deployment?

Answer: Firmware is versioned per lot and delivered through the OTA client, with a pilot group, a staged release and a rollback image. Kuala Lumpur partners keep control of the schedule.

What shipping terms does AndroidSBC support for Malaysia orders?

Answer: AndroidSBC ships on FOB Shenzhen, CIF or EXW terms and can consign to an Amazon FBA warehouse or a 3PL hub, with the Port of Klang lane booked against the production slot.

What happens if a unit fails in the field in Malaysia?

Answer: The process starts with the serial number. AndroidSBC traces the unit back to its burn-in run, ships a replacement from the same configuration, and the Malaysia partner returns the failed unit on the next consolidation lane.

Contact AndroidSBC: Start Your WF-H618-11 Sourcing Conversation

AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the Allwinner H618 dongle family. Kuala Lumpur integrators can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Malaysia buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC commits to a seven-year firmware update window on the WF-H618 family.